One Last Experiment for the MAACS Project?

The Moving Axis AirCraft Simulator was our popular 2008 research project that combined a moving base flight simulator with a virtual reality headset. We learned a lot from the project, but MAACS may have one last experiment to perform.

During construction, we made about 20 video logs that detailed the designs and design changes along the way. It shows the gadgets and techniques we tried, the tests and the trials. I am considering publishing all the videos in a 20 episode YouTube series. This series will show the public the behind-the-scenes story of the MAACS project for the first time ever.

Things don't go smoothly all the time in this series. There is a lot of trial and error. A lot of ideas we were originally excited about, get tossed after they are found unworkable. My hope is that this series will inspire people to experiment, to try, to create and to accept the inevitable failures along the way. I want to show that it's ok to try a lot of things, keep what works and learn from the things that didn't work.

So, is this a good idea? Should I even bother?

The Top Ten DIY Flight Sims Cockpit Construction Tools

We have a whole workshop full of tools that we use to build our home-made flight simulator projects, but we tend to use these ten tools a lot more than the others.

1. Drill / cordless drill
We would just say cordless drill, but the battery occasionally runs down at the most inconvenient times, so we have the old reliable regular drill to fall back on.

2. Cordless electric screwdriver
This isn’t our cordless screwdriver, it’s a picture of a similar model. We sacrificed ours to science by using the parts to create a jack-screw pitch attitude trim system for the MAACS flight simulator. Turns out we didn’t need it. It was a wonderfully useful tool and I miss it.

3. Chop saw (miter saw)
This single tool makes things 1000% percent easier. You can get by doing infrequent projects with just a hand miter saw, but if you’re going to cut a lot of 2x4’s and PVC pipe like we do, there’s just no choice but to get a chop saw. With the proper blade, it even cuts through metal. Love it.

4. Box knife
The lowly box knife. So simple, but so very useful. This isn’t even a high quality box knife and it’s still useful.






5. Tape measure
It seems like we’re always reaching for the tape measure. Keep one in the workshop, one in the garage, one upstairs, one downstairs. I usually have one clipped to my belt whenever I go to the hardware store. Make sure at least one tape measure is both metric and standard.


6. Adjustable crescent wrench
You can get by most projects with a crescent wrench and a 7/16” wrench and a 9/16” wrench for the ¼” bolts and the 3/8” bolts respectively. If you’re going after larger projects, just get a socket set and ratchet wrench.



7. Sharpie marker
Sharpies are great. If you’re doing a lot of drawing on dark colored medium density hardboard (MDF) or any other dark material, use a silver-colored Sharpie.





8. Paint brush or roller
Paint your flight simulator project.
Paint your flight simulator project. There I said it twice. Paint makes your project look wonderful. Regular interior latex paint is cheap, convenient, and readily available. Keep the paint brush or roller in a ziplock bag in your refrigerator in between coats. It will actually keep wet for weeks.

Paint your flight simulator project. There I said it three times.

9. Caulking gun
Many of the DIY Flight Sims projects use PVC pipe, and we use our trusty Liquid Nails and a caulking gun to glue these pieces together. It’s much more easy to work with than quick-drying, noxious PVC cement.




10. Safety glasses
Are safety glasses a tool? Technically no, but they sure are important, especially if you visit a Federal Aviation Administration Designated Medical Examiner every year. I don’t want a stupid mistake in the workshop to affect my FAA medical certificate.



Did I miss one? What other wonderfully useful tool should be on this list?